PrimaLuna – ProLogue Classic Ολοκληρωμένος Ενισχυτής με λυχνίες
Ο PrimaLuna – ProLogue Classic, είναι ένας hi-end πανέμορφος ολοκληρωμένος ενισχυτής με λυχνίες και ισχύ εξόδου : 35 watts με λυχνίες EL34, 40 watts με λυχνίες KT88 και 44 watts με λυχνίες KT120.
Ο PrimaLuna – ProLogue Classic, σας φέρνει άμεσα τον ηχητικό κόσμο της λάμπας, εύκολα, χωρίς πονοκεφάλους και χωρίς να έχετε τεχνικές γνώσεις.
Κατασκευασμένος με τα καλύτερα υλικά της αγοράς και με μοναδικές καινοτομίες!
Και όλα αυτά σε μία απίστευτη τιμή!
Υποστηρίζει τις κάτωθι λυχνίες, απλός με το πάτημα ενός διακόπτη:
EL 34 – 35 watts, KT 88 40 watts, KT 120 44 watts.
Παραδίδετε με τις λυχνίες : 2x 12AX7, 2x 12AU7, 4x EL34.
Διαστάσεις Π x Υ x Β: 28 x 19 x 39cm.
Βάρος: 17.650 Kgr
Επίσης διατίθεται και με προαιρετικό Phonostage MM.
Output: 35 watts x 2 EL34, 40 watts x 2 KT88, 44 watts x 2 KT120 (KT150 Not Compatible).
Freq. Response: 10Hz-65kHz +/- 3dB
THD: Less than 1% at full power
S/N Ratio: 89 dB
Input Sensitivity: 285mV
Power Consumption: 285 watts
Dimensions: 28 x 19 x 39cm (WxHxD)
Weight: 17.650 Kgr
Inputs: 4 pair RCA
Outputs: 4 and 8 Ohm speaker taps
Standard Tube Compliment: 2 – 12AX7, 2 – 12AU7, 4 – EL34.
* PrimaLuna – ProLogue Classic – Integrated tube amplifier
The original PrimaLuna integrateds, the ProLogue One and Two, have reached cult status and are now a collectible that will no doubt be iconic in the years to come. Some are going so far as to call them “The Marantz 8B of our time”.
The multi-award winning ProLouge One was in a recommended system called “Tube Nirvana” by The Absolute Sound’s Robert Harley. Stereophile’s Art Dudley stated “Lustily, heartily, and enthusiastically…recommended.”
The ProLogue Two was loved the world over in review after review.
If something works, don’t fix it.
But there were still improvements that could be made.
The PrimaLuna engineers in The Netherlands went to work to make this the new classic.
The ProLogue Classic Integrated brings you to a world of glorious tube sound and superior engineering and parts selection:
Innovative Adaptive AutoBias A PrimaLuna exclusive. If anybody tells you that they have auto bias, ask them precisely how.
It’s most likely not true.
As with all PrimaLuna amps, you never have to worry about biasing your amp ever again, and the need for matched tubes is eliminated.
Just plug in a myriad of different tubes including EL34, KT88, or KT120 (the cage must be left off to use KT120) and AAB does the rest while improving sound quality.
Tubes are constantly monitored and kept in their best operating range, reducing distortion by up to 50%.
ALPS Blue Velvet volume control tracks better so a defined stereo image is established and doesn’t collapse as you raise and lower volume.
And it will stay quiet, adhering to PrimaLuna’s guiding principle of “Built to last a lifetime”.
PTP-circuit. If the power transformer should overheat, this “Power Transformer Protection” circuit cuts primary power, allows the amp to cool down, then resets itself.
OTP-circuit. The “Output Transformer Protection” circuit protects the output transformers in the event of user error crossing speaker wires.
Simplified BTI-circuit. BTI stands for “Bad Tube Indicator.”
If a power tube fails, BTI circuit then puts the amp into protection mode, and the green LED on the facteplate turns to red. With other brands, this may be when you have to break out the soldering iron to replace a plate resistor, and replace two or four tubes because your amp requires matched sets.
With PrimaLuna, you just replace the bad tube (no matched tubes required), and turn the amp back on. No hassles, no headaches.
Soft-start circuit Extends component and tube life by powering up the amp gently every time you turn it on.
Custom designed output transformers Encapsulated low hum, wide bandwidth for great bass and extended highs.
Designed by Marcel Croese and one of the most prestigious transformer designers in the USA .
Upgraded Solen capacitors made in France for beauty and fast recovery diodes to keep control when music gets busy.
Panel mounted ceramic tube sockets and rear jacks. Some brands will mount tube sockets or hook up jacks to a printed circuit board.
As the product ages, these boards can crack by simply changing tubes or cables. All PrimaLuna products mount ceramic tube sockets to a stand off, and the rear panel jacks are secured directly the the chassis.
SmartWatts design. PrimaLuna’s true-value, low stress design philosophy.
Many manufacturers fudge on their power ratings, claiming power that is mathematically impossible.
Every seasoned tube owners knows that 20 watts from a tube amp is a ton of power.
What is really important is that PrimaLuna runs their power tubes up to 40% easier that other manufacturers.
You can tell easily by putting your hand on top of a PrimaLuna amp. They run cooler than others.
There is no reason to run tubes at their jagged edge. Why do manufactures do it?
Point to point wiring. The ProLogue Classic is a work of art with internal construction you won’t find elsewhere.
It takes more time to build, and is assembled by artisans, but it will last a lifetime.
Chassis made of finely finished heavy gauge steel, and five step automotive quality finish. Each coat hand rubbed and polished.
Removable tube cage included no charge.
Toroidal power transformer for low hum, and a front end that is dead quiet.