Audio Technica AT100E-HSB Cartridge with Headshell Combo Kit

3345rpm » Audio Technica AT100E-HSB Cartridge with Headshell Combo Kit

Προσφορά!
Audio Technica AT100E-HSB Cartridge with Headshell Combo Kit
Audio Technica AT100E- HSB Cartridge with Headshell Combo KitAudio Technica AT100E_HSB Cartridge with Headshell Combo Kit

Audio Technica AT100E-HSB Cartridge with Headshell Combo Kit

185,00 149,99

ΑΜΕΣΑ ΔΙΑΘΕΣΙΜΟ

Κωδικός προϊόντος: ATHSB100 Κατηγορία:

Περιγραφή Προϊόντος

Audio Technica AT100E-HSB Cartridge with Headshell Combo Kit
Includes the Audio Technica AT100E Cartridge and AT-HS10BK Headshell.
Audio Technica’s AT100E VM stereo cartridge features a structure that improves performance of the vibration system, allowing the stylus perfect contact to the record surface.
Additionally, it adopts a lossless Paratoroidal generator coil system to their cartridge bodies that results in peak generating efficiency.
Stacking two cores makes further improvements to high frequency characteristics by separating the right-and-left channels from the center shield plate, resulting in reduced electrical cross talk.
The VM type AT100-series’ dual magnet vibration and generation systems have been highly praised all over the world and have become a long-selling series.
The lightweight aluminum AT-HS10BK is a universal ½ inch-mount headshell for 4-pin turntable cartridges.
Featuring an aluminum die-cast body, the AT-HS10BK is designed to keep vibration to the bare minimum.
The finger lift is positioned near the front of headshell to enable precise placement of the stylus onto the record.
The headshell is equipped with gold-plated lead wires for lossless signal transmission and comes with mounting screws.
AT100E/HSB Specifications:
Components: Includes Audio-Technica AT100E Cartridge and AT-HS10BK Headshell
Frequency Response: 20-20,000Hz
Channel Separation: 27 (dB at 1 kHz)
Vertical Tracking Force: 1.0-1.8 grams (1.4grams optimal)
Recommended Load Impedance: 47
Output: 4.5 (mV at 1 kHz, 5 cm/sec)
Channel Balance: 1.5 dB (1 kHz)
Stylus Shape: 0.3 x 0.7 mil jointed elliptical
Mount: Half-inch
Replacement Stylus: Audio-Technica ATN100E

Headshell AT-HS10BK Specifications:
Material: Aluminum
Connector: Aluminum
Weight: 10.0gr, excluding lead wire
Dimensions: 13.7mm H × 21.0mm W × 52.0mm D
Accessories: Installation screws (16mm × 2 & 10mm × 2), Nuts x 2, Plastic washers x 2

ΕΠΙΠΛΕΟΝ ΠΛΗΡΟΦΟΡΙΕΣ

Manufacturer

Audio Technica